The heart of a high-pressure cleaner is the lance, because from this part of the water comes out to work with enormous pressure to do its job. This high pressure lance must therefore be extremely stable, we at Hammerkauf choose only very high quality steel products for you. High pressure cleaner in use The cleaning agent used here is pure water. However, this fluid is placed under extremely strong pressure in the device, so that it develops enough force to immediately dissolve most of the dirt when leaving the high-pressure lance. So that you can selectively activate the jet and stop it again, a bypass valve ensures that the pressure can escape safely when the lance is closed. Excellent controllability of the pressure Not every spot can be worked with the same force. It is best to start with relatively low pressure and increase it if the cleaning performance does not occur. Starting at full power, relatively loose deposits on the surface to be cleaned might dissolve too quickly and spread uncontrollably. Align the jet pipe with solidified patches so that the pressure develops its highest force just at the edges. The dirt will evaporate faster then. Extreme pressure resistance with KEW and Kärcher Up to 400 bar can withstand any cooling, which you can order from us. That's about 200 times as much as a car tire! With such loads it depends on high-quality processing! The jet pipe must be perfectly designed, we swear by materials such as stainless steel or galvanized steel. The tip, the connection and seals must meet the highest standards. High pressure cleaner for different applications You do not need multiple devices to achieve different effects. The lance itself determines how and where the strong jet of water will hit dirt. Here at Hammerkauf you will find products from renowned producers such as KEW and Kärcher. Double lance lances distribute the pressure, creating a larger area of attack. You can take off our high-pressure telescopic lance up to 5.6 meters. You can also reach hidden or hard-to-reach places. Safe handling of high pressure equipment At Hammerkauf we assemble high quality products for work and leisure in our assortment. Keep in mind that with Kärcher and KEW devices, you can produce enormously high prints. Therefore never point the spray lance at people or objects that are fragile. After replacing the lance always make sure that the new model is well connected.